Specifications
GVWR 23,500 lbs
Payload Capacity
17,500 lbs payload capacity (based on 10k axle setup)
Axle
Axles
10,000 lbs. tandem axles (option axles: 12k and 15k)
Hubs
Oil bath hubs, 8 studs on 6.5″ circle
Brakes
Electric brakes on all wheels
Suspension
Slipper spring suspension
Springs
Adjustable spring pads for axle alignment
Spring Hangers
Reinforced spring hangers with 3″ structural C-channel
Tires
(8) 16″ x 6″ dual wheels
Wheels
(4) four – 16″ x 6″ dual wheels (8 hole on 6 1/2″ bolt circle)
Mud Flaps
1 Pair
Pole Bolsters
Front
Front bolster mounted on the extendable tongue: 95″W fixed 5″ double C-channel with 21″ stanchions
Tongue Receiver
Intermediate pole saddle mounted at the tongue receiver tube with winch binder and 4″ poly stra
Center
Center bolster: 95″W fixed 5″ double C-channel construction with 21″ stanchions
Stanchions
21″ lever lock, sliding and removable
Winch
(4) Heavy duty ratchet type winch binders with breaker bar
Straps
(4) 15’L x 4″W x 12,000 lbs. nylon straps
A-Frame and Jack
Frame
8″ structural C-channel A-frame
Jack
(2) linked – heavy duty drop leg jacks – 12,000 lb. static load capacity mounted on the extendable tongue
Jack
(1) heavy duty drop leg jack on mounted in A-frame for extending tongue and strapping load.
Tongue and Hitch
Extendable Tongue
8″ x 6″ tubular extendable tongue with lubricated steel wear pads and a greaseable roller
Safety
Dead man stops welded to inner tongue to assure tongue extension cannot pull all the way out
Hitch Plate
6-position adjustable hitch plate
Lunette Eye
2-1/2″ lunette eye
Safety Chains
1/2″ galvanized safety chains with safety hook and anchor shackle. Safety chain breaking load 45,200 lbs.
Pole Bolsters
Front
Front removable/adjustable bolster: 45″ wide tubular bolster (mounted on extendable tongue)
Center
Center bolster: 5″ double “C” fabricated bolster with 21″ lever lock stanchions
Rear
Rear bolster: 5″ double “C” fabricated bolster with 21″ lever lock stanchions
Pole Cradle
Single pole cradle at front of A-frame tongue for center pole
Winch
(4) four – Heavy duty ratchet-type winch binders with breaker bar
Straps
(4) four – 15′ long x 4″ wide x 12,000 lbs. nylon straps
Tongue and Hitch
Extendable Tongue
8″ x 4″ x 1/4″ wall extendable tongue with UHMW polyethylene wear pads
Hitch Plate
6-Position adjustable hitch plate
Lunette Eye
2 1/2″ Lunette eye, 42,000 lbs. capacity
Safety Chains
3/8″ x 36″ long safety chains with safety hooks to match trailer GVWR
Collar
Extendable tongue is attached to trailer with removable, bolt-on collar with greaseable roller for easy extending and retracting
Main Frame
Main
8″ x 4″ tubular main frame
Receiver Tube
10″ x 8″ tongue receiver tube
Crossmembers
8″ x 4″ tubular steel crossmembers under rear bolster
Additional
3″ structural C-channel crossmembers
Fenders
Tread Plate
Fabricated 1/8″ steel diamond tread plate fender construction
Additional
Reinforced with 3″ structural C-channel at front and rear of fender
12 Volt Wiring System
Lights
ICC and DOT approved LED lights
Weather Proofing
Sealed beam rubber mounted stop, turn, trail and marker lights
Harness
Wiring loom terminated in junction boxes
Wiring Loom
Wiring Loom Terminated in Junction Boxes
Connections
Connctions soldered and sealed with heat shrink tubing
Wiring
Electrical plug terminated in junction box
Plug
6-way aluminum die cast plug (truck side) in rear butt tube for light bar hook-up
Truck Side Plug
6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
Breakaway Kit
Breakaway kit with sealed lead acid battery and trickle charger
Paint
Surface Prep
Trailer is completely steel grit blasted
Sealing
Seams are Sealed with Paintable Caulk
Corrosion Protection
Rust Prohibitive Two-Part Epoxy Polyamide Primer
Top Coat
Two-Part Acrylic Polyurethane Topcoats
Painted Parts
All Attachments Painted before Assembly and Installed with Serviceable Fasteners
Photos of the Brooks Brothers PTB-162 XL
Are you getting ideas?
We Can Customize it
Ring Power Utility | Truck | Crane offers customization options for the Brooks Brothers PTB-162 XL, tailoring the crane to meet specific operational needs. From specialized attachments to unique modifications, their expert team ensures the PTB-162 XL fits your precise requirements. For personalized solutions and to explore customization options, contact Ring Power for expert advice and support.