Specifications
Payload Capacity 22,400 lbs
GVWR 26,000 lbs
Axle
Axle
22,500 lbs. Single Straight Axle
Hubs
22,500 lbs. Single Straight Axle
Brakes
Air Brakes with Auto Slack Adjusters
ABS
ABS equipped and spring brakes
Springs
Adjustable Spring Pads for Wheel Alignment
Spring Hangers
Reinforced spring hangers with 3″ structural channel
Tires
(4) Four – 255/70R 22.5 Tires
Wheels
(4) Four – 22.5 10 bolt dual wheels
Mud Flaps
One Pair
Pole Bolsters
Front
95″ Wide Double C-Channel Front Bolster with 21″ Stanchions
Center
95”W Fixed 5” Double C-Channel
Rear
95”W Fixed 5” Double C-Channel Construction with 21” Stanchions
Stanchions
(4) four – 21” Lever Lock, Sliding & Removable
Winch
(4) four – Heavy Duty Ratchet Type Winch Binders with Breaker Bar
Straps
(4) four – 15′ long x 4″ wide x 12,000 lbs. nylon straps
Tongue and Hitch
Extendable Tongue
8” x 4” x 1/4″ Wall Extendable Tongue with Extension Assist Roller and replaceable UHMW-PE Wear Pads
Hitch Plate
6-Position Adjustable Hitch Plate
Lunette Eye
2 1/2″ Lunette Eye, 35000 lbs. Capacity
Safety Chains
3/8” x 36”L Galvanized Safety Chains with Safety Hook and Anchor Shackle
Jack
12,000# Heavy duty drop leg jack
Structure
7” Structural C-Channel A-Frame
Tool Box
Aluminum Under Body Tool Box: 18″ x 18″ x 48″ with stainless steel “T” latche
A-Frame and Jack
Frame
7” x 4” Tubular Steel Frame
Receiver Tube
10” x 6” Receiver Tube
Rear Bolster
7” x 4 “ Tubular Steel Crossmembers Under Rear Bolster
Crossmembers
3” Structural C-Channel Crossmembers
Fenders
Tread Plate
Fabricated 1/8” Steel Diamond Tread Plate Fender Construction
Mud Flaps
One pair mud flaps
Reinforcements
Reinforced with 3” Structural C-Channel at Front and Rear of Fender
Floor
12 Gauge Steel Floor in between the center and rear bolsters
12 Volt Wiring System
Lights
ICC & DOT Approved LED Lights
Weather Proofing
Sealed Beam Rubber Mounted Stop, Turn, Tail and Marker Lights
Wiring Loom
S.O. Cable Wiring Loom, Clamped on 16” Centers with Rubber Lined Clamps
Wiring Loom
Wiring Loom Terminated in Junction Boxes
Loom Terminal
Wiring Loom Terminated in Junction Boxes
Wiring
Connections Soldered and Sealed with Heat Shrink Tubing. Internal Wiring and air lines in Tongue, Plug Receptacle Located at Each Pinnable Location, Eliminates Coil Cord
Plug
36” Pigtail w/ 6-Way Aluminum Die Cast Plug, Terminated at Junction Box
Receptacle
7 way tractor trailer receptacle mounted on front of tongue for coil jumper cord to connect the truck to trailer
Truck Side Plug
6-Way Aluminum Die Cast Plug (Truck Side) in Rear Butt Tube for Light Bar Hook-Up
Breakaway Kit
Breakaway Kit with Sealed Lead Acid Battery & Trickle Charger
Paint
Galvanized
3 step Triple Hot Dipped Galvanized Finish
Corrosion Protection
Rust Prohibitive Two-Part Epoxy Polyamide Primer
Top Coat
Two-Part Acrylic Polyurethane Topcoats and 2″ Red/White Reflective Tape
Painted Parts
All Attachments Painted before Assembly and Installed with Serviceable Fasteners
Photos of the Brooks Brothers PTB-111-20KA
Are you getting ideas?
We Can Customize it
Ring Power Utility | Truck | Crane offers customization options for the Brooks Brothers PTB-111-20KA, tailoring the crane to meet specific operational needs. From specialized attachments to unique modifications, their expert team ensures the PTB-111-20KA fits your precise requirements. For personalized solutions and to explore customization options, contact Ring Power for expert advice and support.